Clicky

Best 1200 Watt Amp in 2022 – Reviews and Buyer’s Guide

Imagine you are a music lover. You bought a new car only to find out that the stereo system is not up to standard. Driving your car without a good stereo system is like taking your tea without sugar. But let’s be honest; not many cars come with built-in amps that make for a great stereo experience for drivers and passengers alike.

Best 1200 Watt Amp in 2022 – Reviews and Buyer’s Guide
Photo by Oudom Pravat on Unsplash

How do you make up for this bad stereo design in your car? You definitely need to fix an external amp to boost your car speakers. If this is your headache, this article could be your medication. We discuss several 1200 watt amps to ease your search to find the right amp for you with features like bass boost, power output, etc. Read more to find the optimal audio setup for your car’s stereo system.

How We Rated the Best

How We Rated the Best
Photo by Misael Moreno on Unsplash

We considered a lot of factors before rating these amps. These factors are listed below.

Power output

We looked out for the power output of the amp and checked if they really give out the required power as advertised. You are likely to be disappointed if you take the advertised power for granted. In most cases, 1200 watts is the max power output while the RMS rating is much lower. In some cases, some low-budget amps have a power output lower than the advertised 1200 watts. In some instances, some of these low-budget amps cannot manage 300 watts of power.

Crosstalk/Channel Separation

Because some of the amps we discussed are multi-channel, we doubled down on the issue of crosstalk since the channels are designed to be close to each other. The issue of crosstalk is significant in our rating because the more the crosstalk in an amplifier, the less pleasant its stereo system would be to the ear.

Crosstalk is an undesirable signal coupling between the channels of an amp. Though amp IC’s are designed to have the maximum separation of channels, external factors like power supply, design, and a host of others can introduce crosstalk and affect the sound quality of the speakers or subwoofers connected to the amps. The bigger the channel separation the smaller the crosstalk, and the better the sound quality of the amplifier.

Amplifier Class

The class of an amp is determined by the way it combines power and signals. There are four types of amplifiers available. They are class A, class B, class AB, and class D.  The best amp class to use depends on your needs. Class A amps give a high fidelity but low efficiency typically at 25%. Class B amps give low fidelity but high efficiency typically from 50% and above.

Despite the fact that no amp is 100% efficient, amps of class AB are seen as the best. With an efficiency of 60%, class AB amps are more efficient than class A and introduce less distortion than class B amps. Class B amps are also coming up as amps of choice because they have been built with more or less the accuracy of class AB amps.  Whether or not a product made it to our list of top-rated 1200 watts depended on its class.

Signal-to-Noise Ratio

All electronic audio devices like amps build up more or fewer interference signals. Coupled with background noise, this can gravely affect the quality of the frequency signal. Signal-to-Noise Ratio (SNR) compares the signal power to the level of noise power. The higher SNR measurement indicates better output since there is more useful information coming out than noise.

CEA-2006 certification

Before rating a device, we check to see if it has a CEA-2006 certification. CEA-2006 is a car amp certification that makes it easy for buyers to compare amplifiers.  CEA-2006 is a car amplifier standard respected by many manufacturers like Rockford Fosgate, Pioneer, etc. Even though CEA-2006 certification is not mandatory, it gives a good impression of how an amplifier would perform. Let me issue a disclaimer; not all good amps come with CEA-2006 certification.

You Might Be Interested:
Best 2000 Watt Amp in 2022 – Reviews and Buyers Guide
Testing Amplifier Output

Product Review

The following is the list of our top-rated 1200 watt amplifiers.

1. Audiotek AT900

Audiotek At804S
  • Bridgeable MOSFET Amplifier
  • Tri-mode capable
  • Heavy-Duty aluminum alloy heat sink
Check Amazon Price

The Audiotek AT900S is a 2 channel Amp with 2 ohms resistance. The advertised power output is pegged at 1200 watts. This amplifier is a stereo amplifier because it is of class AB. It’s designed to carry out high-frequency sounds like treble or low frequencies like deep bass. depending on your speakers, it offers features like bass boost. After detecting the voltage of your speaker connected, it switches automatically.

The Audiotek AT900S has a dimension in terms of length, width, and height of 9.72″ x 2.2″ x 9.45″. The maximum power output is 1200 watts but when we tested it, the figure we got was awfully low, which stood at 172 watts. The amp comes with low-level and high-level RCA outputs so you can connect it to your head units without needing an adapter. The amp comes with a fixed high-pass filter (200Hz) and a variable low-pass filter between 35Hz to 160Hz. The bass boost knob is between 0 dB to 18 dB. The amp has a single 20A fuse which is a reason why the amp cannot shoot up to the advertised power of 1200 watts.

The Audiotek AT900S is likely to be better than your in-built car amp, but if you are trying to install powerful speakers, then you might probably have to look for different alternatives. but if your speakers are small needing anything within the range of 50 to 100 watts RMS, then you would probably be fine with this amp.

Rating

  • Power output: 3
  • Crosstalk/channel Separation: 10
  • S/N Ratio: 10
  • CEA-2006 Certification: 0
  • Amplifier class: 9

Product Specification

Power output: 1200 watts
Total Harmonic Distortion (At RMS output):0.01%
S/N Ratio: 103db
Variable low pass: 35-160 Hz
High pass crossover:200Hz
Amplifier class: AB
Dimension:9.72″ x 2.2″ x 9.45″
Pros:
  • Compact and slim
  • High-level (speaker level) and low-level RCA inputs
  • Tri-Mode capable
  • Bridgeable
Cons:
  • The actual maximum power output is much lower than advertised
  • Not CEA-2006 certified

Why We Like It: For its price and size, the Audiotek AT900S delivers the best high-quality stereo for your low-demand speaker or car stereo system.

2. Boss Audio ARMOR AR 1200.2

BOSS Audio Systems AR1200.2
  • Variable Bass Boost
  • MOSFET Power Supply
  • Bridgeable
Check Amazon Price

Like Audiotek AT900S, Boss Audio AR1200.2 is also a class AB 2-channel amp. It has an advertised power output of 1200 watts. While AR1200.2 gives an output higher than Audiotek AT900S, its power output is nevertheless much lower than what is advertised. When we put the amp to test, output power stood at 307 watts. In terms of price, AR1200.2 is pretty decent and has a performance that is worth the value.

AR 1200.2 amp has a weight of 4.5lb. Its dimensions are 2.8″ tall, 6.5″ wide, and 10.3″ long. The ARMOR amp has both input types: high-level (speaker level) and low-level (RCA). You also don’t need an adapter to convert high-level signals coming from your receiver. The fixed high pass filter for the ARMOR amp stands at 80 Hz whereas its variable low pass filter is between 50Hz and 250Hz. The variable bass boost knobs of the Armor amp rotate from 0dB to 18dB.

One advantage of the ARMOR amp is its overheating and short circuit protection so it’s not likely to get burnt as you use it.

Rating

  • Power output: 4
  • Crosstalk/channel Separation: 10
  • S/N Ratio: 10
  • CEA-2006 Certification: 0
  • Amplifier class: 9

Product Specification

Power output: 1200 watts
Total Harmonic Distortion (At RMS output):0.01%
S/N Ratio: 105db
Variable low pass: 50Hz to 250Hz
High pass crossover:80Hz
Amplifier class: AB
Dimension:10.3″ x 6.5″ x 2.8″
Pros:
  • Double RCA inputs
  • Overheat and short circuit protection.
  • Simple to install
Cons:
  • Not CEA-2006 certified
  • The maximum power output is 307 instead of 1200 watts

Why We Like It: This amp is a bit more efficient than the AT900S. We like it for its overheating and short circuit protection.

3. Pioneer GM-D8704

Pioneer GM-D8704
  • 1, 200 Watts Max Power
  • Compact Design
  • Refined Class FD Design
Check Amazon Price

Pioneer is a class D 4-channel amp.  The amp is CEA-2006 certified. It has an advertised power output of 1200 watts. But when we tested it, the maximum power output measured was 691 watts.

The amp is designed to be small and compact. Unlike class ab, this amp does not come with big heating because it is a class D Amp. Its dimensions are 8.46 inches long, 9.92 inches wide, and 2.26 inches high. The amp also features only low-level RCA input. However, they can receive high-level input signals. To do this, you must first connect the speaker level to the RCA inputs using an adapter that can be found in the package. It also comes with two RCA outputs just in case you want to connect an additional amp for another purpose.

GM-D8704 amp weighs 8.82 pounds and features variable low and high pass crossover filters that you can adjust within the range of 40Hz to 500Hz. You can install a bass booster, which allows you to adjust your sound up to 18dB. It works on a 30 A fuse.

Rating

  • Power output: 6
  • Crosstalk/channel Separation: 10
  • S/N Ratio: 9
  • CEA-2006 Certification: 10
  • Amplifier class: 9

Product Specification

Power output: 1200 watts
Total Harmonic Distortion (At RMS output):<0.05%
S/N Ratio: 75dB
Variable low pass: 40Hz to 500Hz
High pass crossover:40Hz to 500Hz
Amplifier class: d
Dimension:8.46″x9.92″x2.26″
Pros:
  • Can operate in 2-channel, 3-channel, and 4-channel
  • Inputs are grouped in two independent channels for flexibility.
  • RCA input receives both high and low-level signals
  • Its CEA-2006 certified
Cons:
  • Could drain your car battery
  • The maximum power output is 307 instead of 1200 watts

Why We Like It: We like this amp because it gives us the flexibility of using it in three different three options: 2-channel, 3-channel, and 4-channel.

Hifonics ZXX-1200.1D is a class D, mono channel amp. Its advertised power output is 1200 watts, but when we tested it, we measured 806 watts. This is an improvement compared to the power output of other amplifiers on this list.

4. Hifonics ZXX-1200.1D

Hifonics ZXX-1200.1D
  • Class D Amplifier
  • Built for Powerful Sound
  • Made to Last
  • Classic Hifonics Look
Check Amazon Price

Hifonics ZXX-1200.1D is a class D, mono channel amp. Its advertised power output is 1200 watts, but when we tested it, we measured 806 watts. This is an improvement compared to the power output of other amplifiers on this list.

The dimensions of the amp measure 12.6″ in length, 10″ in width, and 2.4″ in height. ZXX 1200.1D features low-level RCA input and RCA output for connecting another amp for a subwoofer. Unfortunately, the amp does not come with speaker-level inputs or high-level inputs. Hifonics also has a low-pass crossover filter that functions between 40Hz to 300Hz. Its subsonic filter operates between 10Hz and 40Hz. Another feature of this amp is its bass boost, which cuts off at 18dB comes with a bass-level controller.

It comes with an 80A fuse and weighs 12lbs.

Rating

  • Power output: 7
  • Crosstalk/channel Separation: 10
  • S/N Ratio: 10
  • CEA-2006 Certification: 0
  • Amplifier class: 9

Product Specification

Power output: 1200 watts
Total Harmonic Distortion (At RMS output):10-40Hz
S/N Ratio: 103db
Variable low pass: 40-300 Hz
High pass crossover:40Hz to 500Hz
Amplifier class: AB
Dimension:12.6″ x 10″ x 2.4″
Pros:
  • Compact and slim
  • High-level (speaker level) and low-level RCA inputs
  • Aluminum heat sink for efficient heat transfer
  • Class AB topology
Cons:
  • The actual maximum power output is much lower than advertised
  • Not CEA-2006 certified

Why We Like It: This amp features Military-grade PCB construction which makes it extra durable to withstand rough handling.

5. Alpine PDR-M65

Alpine PDR-M65
  • Mono Subwoofer Amplifier
  • Cea-2006 Compliant
  • Variable Low-pass Filter
  • Variable Bass Boost
Check Amazon Price

Alpine is one of our popular amp brands. It is also a reputable manufacturer on the amp market. Their advertised power output is usually nearly accurate when tested, as we shall see with this very amp under review. One of the advantages is that they are not expensive, offering great quality for their price.

Alpine PDR-M65, also a mono channel digital amp with an advertised power output of 1300W. However, when tested, we measured a maximum power of 806 Watts. The amp uses two 35A fuses and has a weight of 7.04 pounds. The amp can deliver 450 watts continuously into one 4 ohms channel or 600 watts if the channel is 2 ohms.

Also, these amps are unstable at 1 ohm and can not be bridged. It has a bass boost of up to 12dB, which comes with a bass-level remote. And because it has overload, overheat and short circuit protection, it is capable of driving your 500 RMS subwoofer without getting burnt.

Ratings

  • Power output: 7
  • Crosstalk/channel Separation: 10
  • S/N Ratio: 10
  • CEA-2006 Certification: 10
  • Amplifier class: 9

Product Specification

Power output: 1200 watts
Total Harmonic Distortion (At RMS output):10-40Hz
S/N Ratio: N/A
Variable low pass: 50-400 Hz
Amplifier class: AB
Dimension:9.0” x 7.2” x 2.1”
Pros:
  • Class D amplification
  • Compact and cute
  • Simple control panel
  • RCA outputs
Cons:
  • Not compatible with high-level input signals
  • The packaging doesn’t come with a wiring kit

Why We Like It: We like this amp for its overload, overheat, and short circuit protection mechanism

6. Kicker CX1200.1 Mono

Kicker CX1200.1 Mono
  • Get clear, powerful sounds in your vehicle with the Kicker 1200 W Mono Amplifier
  • RMS Power: 600 Watt x 1 channel @ 4 Ohm | 1200 Watt x 1 channel @ 2 Ohm


Check Amazon Price

We recommend Kicker CX1200.1 Mono for people who love a loud bass. It is quite expensive but its performance is worth the price. The variable bass boost allows for a rich performance from your subwoofer, while its fixed subsonic filter removes the extremely low frequencies that cause distortions.

The amp is small and, with guidance from the user manual, easy to install. CX1200.1 is capable of receiving high-level signals making the usage of conversion adapters unnecessary.  It also has two RCA  outputs for daisy-chaining. Though it does not come with a subsonic filter, it boasts of variable low-pass crossover filters which can be adjusted within the limits of 5Hz to 200Hz. If you are the type that likes to boost your music, then you can use the bass boost to do so up to 12dB.

Kicker 1200.1 Mono has a genuine power output when we compare it to other cheaper alternatives. In our estimation, this amp has enough power to consistently deliver your 1000 watts RMS subwoofer. And since the amp is monoblock, it cannot be bridged.

Ratings

  • Power output: 10
  • Crosstalk/channel Separation: 9
  • S/N Ratio: N/A
  • CEA-2006 Certification: 10
  • Amplifier class: 9

Product Specification

Power output: 1200 watts
Subsonic filter: 10-40Hz
Frequency response: 25Hz – 200Hz
S/N Ratio: N/A
Variable low pass: 50-400 Hz
Variable bass boost:0-6dB @ 40Hz
Amplifier class: D
Dimension:12.2 x 7.1 x 2.4 inches
Pros:
  • Compact and cute
  • Simple control panel
  • Low-level RCA inputs capable of receiving speaker level inputs
  • Stable at 2 ohms
Cons:
  • Not stable at 1 ohm
  • Expensive

Why We Like It: The amp has a 3-second delay feature which eliminates all poppadoms unwanted sounds. Also, its hardware design allows you to mount it vertically so you do not have to eat it much floor space.

7. Rockford Fosgate R1200

Rockford Fosgate R1200
  • Auto Turn On With Defeat Switch
  • Cast Aluminum Heatsink
  • Short Circuit & Over Current Protection
  • Remote Level Control Included
Check Amazon Price

Rockford Fosgate is probably the best in our list of 1200 watts amps. It has a power system that is very efficient as it delivers 1200 watts consistently in a 1-ohm subwoofer setup. This Rockford Fosgate product is CEA2006 certified and mono channel amplifier. It has class D topology and unlike the kicker amp, is stable at 1 ohm.

The low pass filter and variable bass boost allow you to tune your subwoofer to maximum play. From the driver seat, you can use the optimal wired remote knob to get full control of the amp’s bass performance.

The amp features a clean design with simple controls. Its compact and slim design is bound to make any amp-enthusiast envious. It has a dimension of 11.1″ long, 6.8″ wide, and 1.97″ tall. Rockford Fosgate comes with low-level RCA inputs,  but with no high-level inputs. In this case, you will need a high-to-low adapter to connect the amp to your traditional receiver.  The amp has two RCA outputs. This is an added feature in case you want to connect another amp for your subwoofer system.

The amp runs on a 150A fuse but when we tested, the maximum amount of current drawn by the Rockford Fosgate was 110A. And, when we tested for the maximum power output, we recorded an impressive 1267 watts.

Ratings

  • Power output: 10
  • Crosstalk/channel Separation: N/A
  • S/N Ratio: 1
  • CEA-2006 Certification: 10
  • Amplifier class: D

Product Specification

Power output: 1267
Infrasonic filter:15Hz – 40Hz
THD+N :<1%
Frequency response: 20Hz -250Hz +/-1dB
S/N Ratio: 100dB
Variable low pass: 50Hz – 250Hz @ 12dB
Variable bass boost:0 – 18dB @45Hz
Amplifier class: D
Dimension:11.1″ x 6.8″ x 1.97″
Pros:
  • Low-level RCA inputs and RCA outputs
  • Higher efficiency
  • Lower operating temperature
  • stable at 1 ohm
  • Reliable and stable 1200 watts RMS power
Cons:
  • Not bridgeable
  • Expensive
  • Get hot under load

Why We Like It: We are able to use this amplifier with low-to-mid frequency sounds to get clear, clean, and loud tunes.

8. Alpine MRV-M1200 Monoblock

Alpine MRV-M1200 Monoblock
  • MRV-M500 - Alpine Monoblock 500W RMS Amplifier
  • Evolution to Class D digital platform
  • New snap-on terminal covers for easy installation


Check Amazon Price

As the name suggests, the Alpine MRV-M1200 is a mono channel amplifier, like the Rockford Fosgate and Kicker. This MRV-M1200 monoblock can deliver up to 1200 watts RMS in your subwoofer, guaranteeing some really cool tunes on your drive.

You should know that MRV-M1200 is a bit more expensive than other similar products on the market.  The design is very stylish. Its dimensions are 13.5″ long, 8.6″ wide, 2.3″ tall. At 9 pounds, this brand is heavier than both the Rockford Fosgate and Kicker amp. When we tested this amp for its maximum power output, we measured an impressive 1152 watts. The amp is stable and can continuously DELIVER 1200 watts into 2 ohms subwoofers.

The MRV-M1200 amp features both high-level and low-level RCA inputs, eliminating the use of adapters to connect this amp to your traditional receiver. It also comes with two RCA outputs so you can connect an extra amp with ease. One advantage of this amp is that the variable low pass filter puts you in charge of all the signals directed to your subwoofer while the variable bass boost enables you to apply low-end punch to your songs. This amp, however, does not come with a subsonic crossover filter.

This amp has four 25A fuses making it 100A in total. The multiple protection systems against overheating, overcurrent, over-voltage, and under-voltage make it one of the best choices for customers looking for a car amp to purchase.

Ratings

  • Power output: 10
  • Crosstalk/channel Separation: N/A
  • S/N Ratio: 9
  • CEA-2006 Certification: 10
  • Amplifier class: D

Product Specification

Power output: 1157
THD+N :<0.1%
Frequency response: 7Hz -400Hz @2 ohms
Bass boost:12dB @ 50Hz
S/N Ratio: >85dB
Variable low pass: 50Hz – 400Hz, -24 dB/octave
Amplifier class: D
Dimension:7.87 x 7.87 x 2.16 inches
Pros:
  • Does the job or loud beats
  • Easy to use and install
  • Durable
  • Stable at 2-4 ohms
  • 4-way protection (overheat, overcurrent, over-current, and under-current)
Cons:
  • Quite expensive
  • No subsonic crossover filter

Why We Like It: The overheat protection system cools down the amp without shutting it down. Let me add that we enjoyed controlling the volume of the amp from the front seat using the amp’s novel RUX-KNOB wired remote controller.

9. Power Acoustik RZ4-1200 Class D Amplifier

Power Acoustik RZ4-1200 Class D Amplifier
  • 1200-Watt max power
  • 100-Watt X 4 at 4-ohm
  • 150-Watt X 4 at 2-ohm
  • 300-Watt X 2 at 4-ohm bridged
  • MOSFET PWM power supply


Check Amazon Price

The design of the Power Acoustik RZ4 amp is very small, compact, and sleek, conforming with the new norm of product designs getting smaller and portable while retaining their performance. This amp features a class D topology making it efficient.  The amp’s microprocessors reduce the power consumption of the product, hence reducing the heat it produces.

With this device, you get a high-level input and Auto turn on feature which means that the amp would automatically turn on when it detects a signal. The 3.5 pounds and 4-channel amp has a dimension of 13.5″ in length g, 6.5″ in width, and 3.5″ in height. The advertised maximum power rating of this amp is 1200 watts but we recorded an output of  259 watts when we tested it.

The high-level input with an Auto Turn On feature of the amp makes it convenient for use. This means the amp would turn on automatically once it detects a signal. Your subwoofer can turn out only desired sounds by omitting unwanted frequencies. This is possible thanks to the 12dB range for the built-in low pass and high pass crossovers.

The brand has incorporated a protection system that guards the device against overheating, short circuitry, and overload.

Ratings

  • Power output: 3
  • Crosstalk/channel Separation: 8
  • S/N Ratio: 9
  • CEA-2006 Certification: 10
  • Amplifier class: D

Product Specification

Power output: 1200
THD+N :<0.5%
Bass boost:12dB @ 50Hz
S/N Ratio: 70dB
Variable low pass: 50Hz – 250Hz, -24 dB/octave
Variable high pass:50Hz – 250Hz, -24 dB/octave
Amplifier class: D
Dimension:13.5 x 6.5 x 3.5 inches
Pros:
  • Easy of use
  • Class D topology
  • Cute enough to fit perfectly under a seat or small area in the car.
Cons:
  • Maximum power output is far less than advertised
  • The size might be too small for your space

Why We Like It: We like this amp because of its tri-stage protection and auto-turn-on feature.

10. Taramp’s MD1200.1 Full Range Amp

Taramp’s MD1200.1 Full Range Amp
  • 1 x Taramps MD1200.1 Amplifier
  • Max Power at 12.6VDC - 1 Ohm: 1200W
  • Max Power at 12.6VDC - 2 Ohms: 1000W
  • Frequency Response at Full Range: 10Hz to 20KHz (-3dB) Cro


Check Amazon Price

This full-range amp is certainly one of the favorite amps among buyers with more than 100 positive ratings. Taramp’s is manufactured with the highest technology offering high efficiency and performance for various types of car stereo systems.  We consider this amp one of the most efficient on the market because of its class D topology. The use of microprocessors has eliminated the need to use large heatsinks. This has resulted in the consumption of less power and consequently less production of heat.

Unlike the power acoustik RZ4-1200d, this amp does not omit frequencies while transmitting them to the speaker. This means that the amp will not suppress sounds but if there is any need to increase the bass, you can make use of the bass boost. This amp feature allows up to 10dB of flexibility. Also, this amp features reduced distortion of sound due to its 1 ohm of output impedance. It weighs 3.96 pounds and has dimensions of 8.98″long, 6.22″ wide, and 2.76″ tall.

The amp operates on 60A at maximum power consumption. Its advertised maximum output power is 1200, but when we tested, we recorded an outstanding result of 1071 watts. This is very impressive, compared to other amps rated 1200 watts.

The amp has a built-in protection system that will turn on to protect the device against short circuits, power supply fluctuations, and high temperatures. Due to the internal design of the device, it is less likely the last two would happen. Yet, manufacturers of Taramp do not leave any of them to chance.

Ratings

  • Power output: 9
  • Crosstalk/channel Separation: N/A
  • S/N Ratio: N/A
  • CEA-2006 Certification: 10
  • Amplifier class: D

Product Specification

Power output: 1200 w
THD+N :<0.5%
Bass boost:10Hz – 20KHz
S/N Ratio: >90dB
Crossover low pass: 80Hz – full, -12 dB
Variable high pass:10Hz -80Hz, -12 dB
Amplifier class: D
Dimension:13.5 x 6.5 x 3.5 inches
Pros:
  • Protection system
  • Class D topology
  • Full range sound
  • One ohm impedance
  • High maximum power output
Cons:
  • Maximum power output is far less than advertised
  • No subsonic filter
  • Not CEA-2006 certified

Why We Like It: With a maximum power output of 1071 watts out of an advertised 1200 watts, this amp has made its mark.

11. Audiopipe 1200W 4- Channel Micro Marine Amplifier

AudioPipe APTV-600.4
  • Class D Waterproof Amplifier
  • RMS Power Specs
  • Multiple Protections
  • Low Resistance Technology
Check Amazon Price

Audiopipe is a brand known for its quality amps. Today we will tell you why this 4-channel micro marine amp is top of its class. Though the use of the term ‘marine’ is out of place, all that the company wants to carry across is that the amp is built to withstand tough conditions. The topology of the amp being class D means the device is very efficient. This amp has low heat output and can work for long periods of time with no issues.

The amp features a PCB board with IPX67 coating, the amp can get wet and still not miss a beat. The adjustable 12dB crossovers allow the amp to cut off voltages that are not set in the desired range. This feature is important for the subwoofer if you have any connection to the amp. Another feature of the amp is the bass boost which allows you to play sounds you prefer.

This small footprint amp weighs 1.45kg and has dimensions of 12.2″ in length, 5.55″ in width, and 3.23″ in height. Like the Taramps MD1200.1,  this amp has multiple protection systems which guard against overheating, overcurrent, and short circuits to make sure the device is under safe conditions. This cute amplifier works on a 40A fuse. Its advertised maximum power output is 1200 but when we tested it, we found the actual figure to be 345 watts.

Ratings

  • Power output: 4
  • Crosstalk/channel Separation: N/A
  • S/N Ratio: N/A
  • CEA-2006 Certification: 0
  • Amplifier class: D

Product Specification

Power output: 345
THD+N :<0.7%
Frequency response: 20Hz – 20KHz
Bass boost:10dB @ 50Hz
S/N Ratio: >90dB
Crossover low pass: 80Hz – full, -12 dB
Variable high pass:10Hz -80Hz, -12 dB
Amplifier class: D
Dimension:13.5 x 6.5 x 3.5 inches
Pros:
  • Multi-protection system
  • Class D topology
  • Can withstand harsh conditions
  • Ajustable 12 dB crossover
Cons:
  • Maximum power output is less than advertised
  • No subsonic filter
  • Not CEA-2006 certified

Why We Like It: This amp comes with an RCA pigtail which allows you to use any radio or Bluetooth controller with RCA output.

Buyer’s Guide

Buyers Guide
Photo by Dawid Zawiła on Unsplash

You can not trust everything that manufacturers say about their products.  For instance, the advertised power ratings on a good number of amps are false. This is why it is imperative you do a thorough investigation before you invest your money into any amp. Here are some of the key things you definitely should look out for when buying an amp.

1. Number of channels

Usually, your unique needs should influence the number of channels that should be on the amp you buy. You would be okay with a mono amp if all you want is to add a subwoofer to your car’s stereo system.

However, if you think your car’s audio system is a complete mess and you need to upgrade the number of speakers and add a subwoofer, that is fine. You can choose from 2-channel or 3 channel amp or even 4-Channel. It also bores down to the number of speakers and subs you want to add.

2. Power Rating

It is always safer not to assume that the manufacturer is honest. Go the extra mile to verify for yourself. I would teach you a quick formula for finding out the actual power ratings of amps. If you can do basic arithmetic, this formula should not be difficult.  Now let’s do the maths.

You can find actual output by multiplying your car battery’s voltage by the fuse rating of the amp as well as the efficiency of the amp. Normally, the average voltage from your battery is 14.4 volts. You can find the fuse rating in the specifications of the amp. The efficiency for analog amplifiers is 60% and that of digital ones is 80%.

Now that you know the parameters, never allow any manufacturer to deceive you.

3. Topology of Amps

Knowing the topology of the amp you intend to buy is key as it can determine whether your amps are efficient and produce high fidelity sounds or not. Class A amps are good with producing high-fidelity sounds but terrible with efficiency. Class B is very efficient but produces poor audio.

Class AB  is a compromise between class A and Class B. Class D is seen as the best in terms of audio output and efficiency. They are now mostly used in modern amps.

We recommend that you buy a class D amp if you want to add just a subwoofer to your car’s stereo system.  If you are looking for a multi-channel amp, we recommend class AB amps.

4. Inputs /Connections

Everyone likes an amp that would give them maximum flexibility.  That’s why you should check out if the amp you intend to buy has inputs for the devices you want to be connected to. Popular input you should check out for is USB for your laptops or home theater Computers. Others are a 3.5mm jack for your phone and for your turntables.

5. Total Harmonic Distortion+Noise (THD+N)

This is a metric for measuring the extent to which the amp affects the quality of the output frequencies. Is quantified in percentages. More distortion means poor quality of sounds produced. The general rule is to choose amps with a low THD+N rating.

6. Signal to Noise Ratio (SNR)

SNR is the measure of the ratio of background disturbances to the desirable sounds produced. Electrons that are whizzing around are the source of this background noise. The goal here is to limit this noise to the bequest miming so we can hear more of the desirable sounds. The general rule is to choose an amp with big SNR numbers. It is measured in decibels.

Frequently Asked Questions (FAQs)

1. What size of amp do I need for the 1200W sub?

In matching an amp with a sub, it is preferable for the former’s RMS rating to be lower than the latter. In this case, anything less than 1000w amp would do.

2. How much does a 1200 watts amp cost?

There is not a specific price tag but anything within the range of 70 and 500 dollars can get a 1200 watts amp.

3. How many amps does a 1200 watts amplifier draw?

1200 watts amplifier draw 10 amps of current

4. What to do with old stereo equipment?

If your old system is eating up your space, these are some of the ways you can deal with them:

  • Resell them at cheap prices to those who might find them useful
  • Donate to a local charity
  • Recycle the nonsmoking parts at a local recycling facility.
  • Dispose of the nonworking parts to a local hazardous waste drop-off.

5. What is the difference between Analog and digital audio?

Analog audio is being recorded by transforming the electric current into the magnetic imprints on the magnetic tape. Digital audio uses bits to record different values of the frequency multiple times in a second.

6. What is a monoblock amplifier?

This is a single-channel amp that provides powerful amplification.  It is usually used for one subwoofer.

7. What class of amp is best for sub?

Class AB or H

8. Are pioneer amps any good?

It depends but generally pioneer’s amps are generally considered as good. The amps are priced as mid-range with good performance and durability at an affordable price.

9. Are dual amps any good?

Yes, dual amps are good. It’s affordable while giving a good audio experience.

10. What class of amps is good for mids and highs?

Any of the under-listed amps would do the job for mids and highs.

  • MTX Audio Thunder 75.4
  • Rockford Fosgate Punch P400X4
  • Superb Sound!JL Audio XD400/4v2
  • Alpine MRV-F300 4 Ch (our pick)

11. Can I use a 1000w amp with a 1200w subwoofer?

Yes. You should use an amp with a power rating less than that of the subwoofer you intend to use them with.

12. Are Alpine amps good?

When it comes to amps, alpine has a collection that is highly regarded by users in America.

13. What is the most powerful car amplifier?

There are several options you can check out but we would strongly recommend the Rockville dB45 amp.

Conclusion

Many of the latest cars come with some pre-installed amps. But some of these amps might not give you the right performance you want. Replacing them in this case comes naturally. However, choosing an amp for your car is no mean task. Several articles on the web further complicate the process because they do not cut through the chase. This article has discussed relevant information that would help you make an informed choice when buying a 1200 watts amp.

Expert Tip

Don’t overlook the impact of bridging. Bridgeable amplifiers alter how wattage is expressed. You can link several amplifiers in parallel to multiply the wattage, but if you overload two or more amplifiers with the intent to quadruple the power, you’ll damage the equipment by overheating or overloading.

Did you know?

The first practical amplifier was invented in 1906 by inventor Lee De Forest. It was called the Audion Triode.

Amazon Recommends:

Bestseller No. 1
Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W
  • Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
SaleBestseller No. 2
BOSS Audio Systems R6002 Riot Series Car Audio Stereo Amplifier - 1200 High Output, 2 Channel, Class A/B, 2/4 Ohm, Low/High Level Inputs, High/Low Pass Crossover, Full Range, Bridgeable, Subwoofer
  • Power - 600 Max x 2 @ 2 Ohms, 300 Max x 2 @ 4 Ohms, 1200 Max Bridged x...
  • Full Range - With a Full Range amplifier you not only have the option...

Leave a Comment

AudioPhilez.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com